- #Fastest video card for mac pro 5 how to#
- #Fastest video card for mac pro 5 install#
- #Fastest video card for mac pro 5 windows 10#
- #Fastest video card for mac pro 5 Pc#
- #Fastest video card for mac pro 5 windows 8#
This will install the Boot Camp drivers you need to be able to select your macOS drive in the Boot Camp Control Panel. `brigadier.exe –model MacPro7,1` might also work at this point, but I haven’t tried it. The exact command of the second part has changed slightly, so you will have to modify it, but you will be able to indicate the version of the command to execute from the file downloaded during the first step.
#Fastest video card for mac pro 5 how to#
The basic instructions are as follows: load a command prompt run as an administrator, run `brigadier.exe –model iMacPro1,1` to download boot camp drivers for iMacPro1,1 which include how to read APFS discs, then run `msiexec / i BootCamp-041-55643 BootCamp Drivers Apple BootCamp.msi` to install it. Once Brigadier is installed, you want to run a few commands to download the iMac Pro Boot Camp drivers. Install 7zip from here: and Brigadier from here. If you are running High Sierra on HFS + and do not plan to upgrade, you can skip this next step. If you’ve created a Boot Camp USB drive from the start from the High Sierra Boot Camp wizard and have since upgraded to Mojave or Catalina, don’t bother with that, as it’s too old for the panel Boot Camp Control. Don’t panic, you can return to macOS in a moment. You will not be able to start in macOS at this point and Windows will start automatically.
#Fastest video card for mac pro 5 windows 10#
Windows 10 should now be installed and you should be started on Windows. It will restart once more, ask for your username and password, and you’re done with the Windows 10 installer. Choose Custom Configuration and answer No to all invasive privacy options: No, No, No, No => Next => No, No, No, No, No => Next. Install Windows as usual, it will copy the files, restart, and then you will have an option to run Express Setup. If you did not flash your bootloader at the first step, it’s ok because you probably have a Mac firmware video card installed here so you can keep the option and boot that way, it will be more difficult to return to Windows later. It should appear in the text menu to which I referred earlier.
Turn off your Mac, reinstall your Mac flash video card, and boot from your USB drive. Be sure to choose Format: Microsoft NTFS and Schema: GUID Partition Map, not Master Boot Record or Apple Partition Map.Īt this point, you’re ready to install Windows, but unfortunately, you’ll have to put your flash video card back on Mac (assuming you have one) because Windows 10, even modern versions of it, won’t show any type of video for example on an RX 580 (that’s what I have.) on Mac Pro 5.1. It could be one of your SATA-2 connected drives or it could be a PCIe connected SSD, I used the latter. Install Paragon or Tuxera (none is free but you will find it useful later, I used Paragon.) Configure your NTFS drive partition from Disk Utility in macOS. I assume that if you have a newer installation version, it will configure an EFI NTFS partition for you, so you will not need to do this next step. Depending on the age of your Windows 10 USB key (mine dates from 2015), the installer will try to create an MBR partition for you that will not start on Mac Pro 5.1. I’m going to assume you have Windows 10 on a USB flash drive, either the one you imagined yourself, or one of Microsoft’s official USB drives.
#Fastest video card for mac pro 5 windows 8#
If you have an SSD in one of your 4 SATA-2 bays and you are running High Sierra and you want to install from a Windows 7 or Windows 8 DVD, you can install using Boot Camp Assistant provided with High Sierra, otherwise, and for most of us, it will not be enough, it will require a little more work than that. This step is recommended but it is not required for the other steps in this guide to work if you want Windows 10 but do not want to install the OpenCore boot loader for any reason. You can do a lot more with OpenCore, but that is beyond the scope of this guide. Thanks for the clever hackers who offered this, in addition to a basic text-based splash screen, you get GPU accelerated h.264 encoding, PCIe connected drives appear internally, macOS Catalina support and Moreover.
Follow the instructions on there is a video you can watch attached to the link, It is not too hard.
#Fastest video card for mac pro 5 Pc#
The first step is to open the splash screen so that you can see what’s going on in the pre-boot environment assuming you’re using a PC graphics card and not a Mac flash card. You can use this guide so you don’t have to go through the pain that I felt. I am writing this post as a guide for others on how to install Windows 10 on their Mac Pro 5.1 more than I am looking for advice for myself.
0 kommentar(er)
